SoftwareCategory:Retaining Wall

Software Categories > Retaining Wall

• MasterKey Retaining Walls Design - Design of both reinforced and unreinforced concrete and masonry retaining walls to CP2, BS 8002, BS 8110, IS 325, and BS 5628.
• QuickRWall - Design of concrete or masonry retaining walls.
• RWALL - Retaining wall design program.
• RetWall - Versatile program for the design and analysis of cantilever or gravity retaining walls with a geotechnical engineering flavor. In addition to the conventional stability checks and structural design, the program provides an estimate of the settlement and rotation of the base, calculates the bearing capacity of the soil based on user-supplied soil parameters, taking into consideration the effects of the wall shape and applied loads. Accounts for the presence of water and easily evaluates seismic conditions. Prepared in accordance with Eurocode and ACI codes.
• Retain Pro - Analysis and design of retaining wall with nearly any configuration or loading condition. Design of restrained (basement and tieback) walls.
• RetainWall - RetainWall is a software mainly developed for the purpose of designing a concrete or masonry retaining wall. The wall may retain soil or other granular material. It analyses the stability of the wall based on the loads and resistances, and results in bearing pressure, sliding, overturning and rotational stabilities. Loads applied on the wall may consist of self weight, soil pressure, water pressure, live and seismic loads. Resistances may consist of base friction and cohesion, passive earth pressure, other structures or a shear key. Load and resistance factor design (LRFD) mode can be applied. If the wall is a reinforced concrete structure, the software also supports the reinforcement design. Main features: - Load and resistance factors design (LRFD) capable - Ready to use load and resistance factors combinations from AASHTO 2007, ACI 318-08 and IBC 2006 - Load and resistance factors editor to modify or create new combination - Concrete reinforcement design from ACI 318-08 - Force diagrams (moment, shear and normal) for every combination - Loads, resistances and reactions diagram for every combination - Wall stabilities (bearing, sliding, overturning, rotation) for every combination - Possibilities to choose active or at rest soil pressures - Possibilities to choose elastic (rock) or plastic (soil) bearing pressures - Possibilities to input user's soil pressure coefficients - Reinforcement design for upper stem, lower stem, toe and heel - Unit systems, properties, load and resistance factors, reinforcement design method, and page setup from last editing become the default for new design - Possibilities to add other loads on wall - Provide stability resistances from a shear key, toe passive soil pressure, adjacent structure, anchors or piles - Enable or disable a shear key, water or seismic - Support metric, SI and British unit systems - Easy, clear, quick and simple software operation - Help facilities
• Retaining Wall Software - Digital Canal's Retaining Wall software designs and checks retaining wall systems, including the wall, footing toe and heel and a footing key if necessary. Retaining Wall can check the capacity of an existing wall (including as "built" bar sizes and spacing) or determine the required dimensions and steel requirements. Walls can be constructed of cast-in-place concrete or masonry and can be cantilevered or supported on the top and bottom (i.e. a basement wall).
• Sheeting Design (Fine) - The program is used to design sheet pile structures. It provides required pile embedment lengths (for fixed and hinged heels) and anchor forces and internal forces on the construction. Sheeting design is program is a part of a geotechnical software suite GEO5. It is easy to understand and use system comprises individual modules with uniform user environment and mutual communication.
• WALLAP - Comprehensive software for design of retaining walls.